Macintosh
Dialup Configuration Using the Internet Setup Assistant -
OS 8, OS 8.5, OS 9
These
instructions are based on Macintosh computers using Operating
System 8 (OS 8) and the Apple Internet Setup Assistant.
The instructions will also work for later versions of the
Macintosh Operating System including OS 8.5 and OS 9; only
the appearance of the self-help screens may vary slightly.
1.
The Internet Setup Assistant should be located in either the
Assistants Folder, or the Internet Folder on your Macintoshıs
hard drive. Open the appropriate Folder and double-click on
the Internet Setup Assistant icon (which is shown below).
2.
At the following "Welcome" window, click the Yes button.
3.
At the following "Internet Account" window, click Yes if you
are already signed up for ValleySurf Internet. If you do not
yet have a ValleySurf account, click No and call ValleySurf
immediately to sign up for an account.
4.
At the following "Introduction" window, read the text and
then click the Right Arrow to continue.
5.
At the following "Configuration Name and Connection Type"
window, type ValleySurf in the space provided as shown below.
Then click the circle next to Modem as shown below. Click
the Right Arrow to continue.
6.
At the following "Modem Settings" window, choose the modem
and port that correspond with your computerıs configuration.
Usually, the first modem indicated will be the one that is
correct for your computer, and the Port will be "Internal
Modem"; consult your computerıs documentation if unsure about
this information. Leave Tone selected as shown below. Click
the Right Arrow to continue.
7.
At the following "Configuration Information" window, enter
the ValleySurf dial-up number that is a local call from the
site where you will be connecting to the Internet. Simply
use our "Dial-Up Number Generator" to find a local number.
You do not need to enter the area code. Next, enter your ValleySurf
username and password in the spaces provided as shown in the
EXAMPLE below. Click the Right Arrow to continue.
8.
At the following "PPP Connect Scripts" window, select No as
shown below. Click the Right Arrow to continue.
9.
At the following "IP Address" window, select No as shown below.
Click the Right Arrow to continue.
10.
At the following "Domain Name Servers" window, enter the information
exactly as shown below. Click the Right Arrow to continue.
11.
At the following "E-mail address and password" window, enter
your ValleySurf e-mail address and password in the spaces
provided as shown in the EXAMPLE below. Leave the ">" symbol
in the final box. Click the
Right Arrow to continue.
12.
At the following "E-mail account and host computer" window,
enter the information requested as shown below (substitute
YOUR ValleySurf email username in the place of "jsmith" in
the example). In the second box, enter information exactly
as shown in the example. Click Right Arrow to continue.
13.
At the following "Newsgroup host computer" window, leave the
box blank and click the Right Arrow to continue.
14.
The following window asks if your computer is using a proxy
server to access the Internet. Select No and click the Right
Arrow to continue.
At the following "Conclusion" window, Congratulate yourself
because you are done! Click the "Go Ahead" button and your
computer will be ready to connect to the Internet using ValleySurf,
where "the surf is always up".
Happy
Surfing!
|
